Configuration Examples with KevTechify for the Cisco Certified Network Associate (CCNA)

https://s3.us-east-2.amazonaws.com/pod-public-media-files/2022/11/26/22/65e1da2b-52cf-4bc6-bd4b-f5dfb7981756_ccna3_v7_ensa_-_ep_12.6.2_-_youtube.mp3

In this episode we are going to look at Troubleshooting Challenge - Use Documentation to Solve Issues.In this activity, we will use the documentation that we created in the previous Packet Tracer - Troubleshooting Challenge - Document the Network activity to guide network troubleshooting efforts. It has been discovered that the network that we worked with in the previous PT activity has developed communication problems. Some hosts are unable to ping other hosts and the internet server. It is our job to determine what the issues are and to locate and repair them. Network issues could exist in any device. Be sure to check for comprehensive errors: Addressing configuration, Interface activation, Routing, and NAT We will be using various techniques and tools to identify connectivity issues, Use documentation to guide troubleshooting efforts, Identify specific network problems, Implement solutions to network communication problems, and Verify network operation.Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.All my details and contact information can be found on my website, <a href="https://kevtechify.com/" rel="nofollow">https://KevTechify.com</a>-------------------------------------------------------Cisco Certified Network Associate (CCNA)Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)Network TroubleshootingLab 12.6.2 - Troubleshooting Challenge - Use Documentation to Solve IssuesPodcast Number: 90Season: 1-------------------------------------------------------Equipment I like.Home Lab ►► <a href="https://kit.co/KevTechify/home-lab" rel="nofollow">https://kit.co/KevTechify/home-lab</a>Networking Tools ►► <a href="https://kit.co/KevTechify/networking-tools" rel="nofollow">https://kit.co/KevTechify/networking-tools</a>Studio Equipment ►► <a href="https://kit.co/KevTechify/studio-equipment" rel="nofollow">https://kit.co/KevTechify/studio-equipment</a>

Troubleshooting Challenge - Use Documentation to Solve Issues - Network Troubleshooting - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 90

https://s3.us-east-2.amazonaws.com/pod-public-media-files/2022/11/26/22/b29bcf80-c280-4304-9dba-ddacbc463e61_ccna3_v7_ensa_-_ep_12.6.1_-_youtube.mp3

In this episode we are going to look at Troubleshooting Challenge - Document the Network.Our employer has been hired to take over the administration of a corporate network because the previous network administrator has left the company. The network documentation is missing and needs to be recreated. Our job is to document the hosts and network devices including all the device addressing and logical interconnections. We will remotely access network devices and use network discovery to complete a device table and draw the network topology.This is Part I of a two-part series of activities. We will use the documentation that you create in this activity to guide you as you troubleshoot the network in Part II, Packet Tracer - Troubleshooting Challenge - Using Documentation to Solve Issues. As we investigate and document the network topology, making note of issues that we discover that do not adhere to the practices taught in the CCNA curriculum. We will be documenting a network that is unknown to you, Testing network connectivity, Compiling host addressing information, Remotely accessing default gateway devices, Documenting default gateway device configurations, Discovering devices on the network, and finally Drawing the network topology.Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.All my details and contact information can be found on my website, <a href="https://kevtechify.com/" rel="nofollow">https://KevTechify.com</a>-------------------------------------------------------Cisco Certified Network Associate (CCNA)Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)Network TroubleshootingLab 12.6.1 - Troubleshooting Challenge - Document the NetworkPodcast Number: 89Season: 1-------------------------------------------------------Equipment I like.Home Lab ►► <a href="https://kit.co/KevTechify/home-lab" rel="nofollow">https://kit.co/KevTechify/home-lab</a>Networking Tools ►► <a href="https://kit.co/KevTechify/networking-tools" rel="nofollow">https://kit.co/KevTechify/networking-tools</a>Studio Equipment ►► <a href="https://kit.co/KevTechify/studio-equipment" rel="nofollow">https://kit.co/KevTechify/studio-equipment</a>

Troubleshooting Challenge - Document the Network - Network Troubleshooting - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 89

https://s3.us-east-2.amazonaws.com/pod-public-media-files/2022/11/25/22/3f6a481c-a124-4547-b925-23c24fdeb503_ccna3_v7_ensa_-_ep_12.5.13_-_youtube.mp3

In this episode we are going to look at Troubleshoot Enterprise Network.This activity uses a variety of technologies that you have encountered during your CCNA studies, including IPv4 routing, IPv6 routing, port security, EtherChannel, DHCP, and NAT. Our task is to review the requirements, isolate and resolve any problems, and then document the steps we took to verify the requirements. The company replaced routers R1 and R3 to accommodate a fiber connection between the locations. Configurations from the previous routers with serial connections were modified and applied as a starting configuration. IPv6 is being tested on a small portion of the network and needs to be verified. Note: Passwords have been removed for ease of troubleshooting in this exercise. The typical password protections should be reapplied; however, the activity will not grade those items.We will be Verifying Switching Technologies, Verifying DHCP, Verifying Routing, and Verifying Connectivity.Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.All my details and contact information can be found on my website, <a href="https://kevtechify.com/" rel="nofollow">https://KevTechify.com</a>-------------------------------------------------------Cisco Certified Network Associate (CCNA)Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)Network DesignLab 12.5.13 - Troubleshoot Enterprise NetworkPodcast Number: 88Season: 1-------------------------------------------------------Equipment I like.Home Lab ►► <a href="https://kit.co/KevTechify/home-lab" rel="nofollow">https://kit.co/KevTechify/home-lab</a>Networking Tools ►► <a href="https://kit.co/KevTechify/networking-tools" rel="nofollow">https://kit.co/KevTechify/networking-tools</a>Studio Equipment ►► <a href="https://kit.co/KevTechify/studio-equipment" rel="nofollow">https://kit.co/KevTechify/studio-equipment</a>

Troubleshoot Enterprise Network - Network Design - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 88

https://s3.us-east-2.amazonaws.com/pod-public-media-files/2022/11/25/22/3e747699-6255-4e1f-9648-0ce9c669f63c_ccna3_v7_ensa_-_ep_11.5.1_-_youtube.mp3

In this episode we are going to look at Compare Layer 2 and Layer 3 Devices.In this activity, we will use various commands to examine three different switching topologies and compare the similarities and differences between the 2960 and 3650 switches. We will also compare the routing table of a 4321 router with that of a 3650 switch. We will be Comparing Layer 2 and Layer 3 Switches and finally Comparing a Layer 3 Switch and a Router.Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.All my details and contact information can be found on my website, <a href="https://kevtechify.com/" rel="nofollow">https://KevTechify.com</a>-------------------------------------------------------Cisco Certified Network Associate (CCNA)Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)Network ManagementLab 11.5.1 - Compare Layer 2 and Layer 3 DevicesPodcast Number: 87Season: 1-------------------------------------------------------Equipment I like.Home Lab ►► <a href="https://kit.co/KevTechify/home-lab" rel="nofollow">https://kit.co/KevTechify/home-lab</a>Networking Tools ►► <a href="https://kit.co/KevTechify/networking-tools" rel="nofollow">https://kit.co/KevTechify/networking-tools</a>Studio Equipment ►► <a href="https://kit.co/KevTechify/studio-equipment" rel="nofollow">https://kit.co/KevTechify/studio-equipment</a>

Compare Layer 2 and Layer 3 Devices - Network Management - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 87

https://s3.us-east-2.amazonaws.com/pod-public-media-files/2022/11/25/22/133e9117-9f86-4e42-a8e6-40532b4dbb9c_ccna3_v7_ensa_-_ep_10.8.1_-_youtube.mp3

In this episode we are going to look at Configure CDP, LLDP, and NTP.A network administrator has been asked to investigate a new client’s network. Documentation is incomplete for the network, so some information needs to be discovered. In addition, the NTP server needs to be configured on a router. Discovery protocols must also be adjusted to control traffic discovery protocol traffic and prevent information about the network from being received by potentially unauthorized hosts.Some of the device IP addresses are unknown to us. We must determine what the IP addresses are so that we can connect to the devices over SSH in order to configure them. We can enter them into the Addressing Table as you discover them.We will be configuring a router to receive time information over NTP and configure devices with CDP and LLDP, Configuring CDP to run globally on a device, Disabling CDP on device interfaces where necessary, Configuring LLDP to run globally on a device, Configuring LLDP to send and receive messages according to requirements, and finally Configuring a router to use an NTP server.Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.All my details and contact information can be found on my website, <a href="https://kevtechify.com/" rel="nofollow">https://KevTechify.com</a>-------------------------------------------------------Cisco Certified Network Associate (CCNA)Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)Network ManagementLab 10.8.1 - Configure CDP, LLDP, and NTPPodcast Number: 86Season: 1-------------------------------------------------------Equipment I like.Home Lab ►► <a href="https://kit.co/KevTechify/home-lab" rel="nofollow">https://kit.co/KevTechify/home-lab</a>Networking Tools ►► <a href="https://kit.co/KevTechify/networking-tools" rel="nofollow">https://kit.co/KevTechify/networking-tools</a>Studio Equipment ►► <a href="https://kit.co/KevTechify/studio-equipment" rel="nofollow">https://kit.co/KevTechify/studio-equipment</a>

Configure CDP, LLDP, and NTP - Network Management - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 86

https://s3.us-east-2.amazonaws.com/pod-public-media-files/2022/11/25/22/c5e98e07-602b-4300-8ddd-d98386e6bd77_ccna3_v7_ensa_-_ep_10.7.6_-_youtube.mp3

In this episode we are going to look at Use a TFTP Server to Upgrade a Cisco IOS Image.A TFTP server can help manage the storage of IOS images and revisions to IOS images. For any network, it is good practice to keep a backup copy of the Cisco IOS Software image in case the system image in the router becomes corrupted or accidentally erased. A TFTP server can also be used to store new upgrades to the IOS and then deployed throughout the network where it is needed. In this activity, we will upgrade the IOS images on Cisco devices by using a TFTP server. We will also backup an IOS image with the use of a TFTP server. We will be Upgrading an IOS Image on a Cisco Device and Backing up an IOS Image on a TFTP Server.Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.All my details and contact information can be found on my website, <a href="https://kevtechify.com/" rel="nofollow">https://KevTechify.com</a>-------------------------------------------------------Cisco Certified Network Associate (CCNA)Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)Network ManagementLab 10.7.6 - Use a TFTP Server to Upgrade a Cisco IOS ImagePodcast Number: 85Season: 1-------------------------------------------------------Equipment I like.Home Lab ►► <a href="https://kit.co/KevTechify/home-lab" rel="nofollow">https://kit.co/KevTechify/home-lab</a>Networking Tools ►► <a href="https://kit.co/KevTechify/networking-tools" rel="nofollow">https://kit.co/KevTechify/networking-tools</a>Studio Equipment ►► <a href="https://kit.co/KevTechify/studio-equipment" rel="nofollow">https://kit.co/KevTechify/studio-equipment</a>

Use a TFTP Server to Upgrade a Cisco IOS Image - Network Management - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 85

https://s3.us-east-2.amazonaws.com/pod-public-media-files/2022/11/25/22/442aea96-4383-416f-8c69-23c8a7f23dcb_ccna3_v7_ensa_-_ep_10.6.10_-_youtube.mp3

In this episode we are going to look at Back Up Configuration Files.In this activity we will restore a configuration from a backup and then perform a new backup. Due to an equipment failure, a new router has been put in place. Fortunately, backup configuration files have been saved to a Trivial File Transfer Protocol (TFTP) Server. We are required to restore the files from the TFTP Server to get the router back online as quickly as possible. We will be Establishing Connectivity to TFTP Server, Transferring the Configuration File from TFTP Server, and finally Backup Configuration and IOS to TFTP Server.Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.All my details and contact information can be found on my website, <a href="https://kevtechify.com/" rel="nofollow">https://KevTechify.com</a>-------------------------------------------------------Cisco Certified Network Associate (CCNA)Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)Network ManagementLab 10.6.10 - Back Up Configuration FilesPodcast Number: 84Season: 1-------------------------------------------------------Equipment I like.Home Lab ►► <a href="https://kit.co/KevTechify/home-lab" rel="nofollow">https://kit.co/KevTechify/home-lab</a>Networking Tools ►► <a href="https://kit.co/KevTechify/networking-tools" rel="nofollow">https://kit.co/KevTechify/networking-tools</a>Studio Equipment ►► <a href="https://kit.co/KevTechify/studio-equipment" rel="nofollow">https://kit.co/KevTechify/studio-equipment</a>

Back Up Configuration Files - Network Management - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 84

https://s3.us-east-2.amazonaws.com/pod-public-media-files/2022/11/25/22/06484304-39c5-4d76-9a99-08437a60ae41_ccna3_v7_ensa_-_ep_10.3.4_-_youtube.mp3

In this episode we are going to look at Configure and Verify NTP.Network Time Protocol (NTP) synchronizes the time of day among a set of distributed time servers and clients. While there are a number of applications that require synchronized time, this lab will focus on correlating events that are listed in the system log and other time-specific events from multiple network devices. NTP uses the User Datagram Protocol (UDP) as its transport protocol. All NTP communications use Coordinated Universal Time (UTC). An NTP server usually receives its time from an authoritative time source, such as an atomic clock attached to a time server. The NTP server then distributes this time across the network. NTP is extremely efficient. No more than one packet per minute is necessary to synchronize two devices to within a millisecond of each other. We will be configuring NTP on R1 and R2 to allow time synchronization.Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.All my details and contact information can be found on my website, <a href="https://kevtechify.com/" rel="nofollow">https://KevTechify.com</a>-------------------------------------------------------Cisco Certified Network Associate (CCNA)Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)Network ManagementLab 10.3.4 - Configure and Verify NTPPodcast Number: 83Season: 1-------------------------------------------------------Equipment I like.Home Lab ►► <a href="https://kit.co/KevTechify/home-lab" rel="nofollow">https://kit.co/KevTechify/home-lab</a>Networking Tools ►► <a href="https://kit.co/KevTechify/networking-tools" rel="nofollow">https://kit.co/KevTechify/networking-tools</a>Studio Equipment ►► <a href="https://kit.co/KevTechify/studio-equipment" rel="nofollow">https://kit.co/KevTechify/studio-equipment</a>

Configure and Verify NTP - Network Management - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 83

https://s3.us-east-2.amazonaws.com/pod-public-media-files/2022/11/25/22/61ea0736-1b05-4650-8bcc-54928ad087c1_ccna3_v7_ensa_-_ep_10.2.6_-_youtube.mp3

In this episode we are going to look at Use LLDP to Map a Network.A senior network administrator requires us to map the Remote Branch Office network and discover information about all of the devices in the network. We must record all of the network device names, IP addresses and subnet masks, and physical interfaces interconnecting the network devices. To map the network, we will use SSH for remote access and the Link Layer Discovery Protocol (LLDP) to discover information about neighboring network devices. Because LLDP is a Layer 2 protocol, it can be used to discover information about devices that do not have Layer 3 connectivity. We will record the information that we gather to complete the Addressing Table and provide a topology diagram of the Remote Branch Office network. We will be Mapping a network using LLDP and SSH remote access.Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.All my details and contact information can be found on my website, <a href="https://kevtechify.com/" rel="nofollow">https://KevTechify.com</a>-------------------------------------------------------Cisco Certified Network Associate (CCNA)Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)Network ManagementLab 10.2.6 - Use LLDP to Map a NetworkPodcast Number: 82Season: 1-------------------------------------------------------Equipment I like.Home Lab ►► <a href="https://kit.co/KevTechify/home-lab" rel="nofollow">https://kit.co/KevTechify/home-lab</a>Networking Tools ►► <a href="https://kit.co/KevTechify/networking-tools" rel="nofollow">https://kit.co/KevTechify/networking-tools</a>Studio Equipment ►► <a href="https://kit.co/KevTechify/studio-equipment" rel="nofollow">https://kit.co/KevTechify/studio-equipment</a>

Use LLDP to Map a Network - Network Management - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 82

https://s3.us-east-2.amazonaws.com/pod-public-media-files/2022/11/25/22/6216aa07-546a-4348-b257-1ff39c80a034_ccna3_v7_ensa_-_ep_10.1.5_-_youtube.mp3

In this episode we are going to look at Use CDP to Map a Network.A senior network administrator requires us to map the Remote Branch Office network and discover the name of a recently installed switch that still needs an IP address to be configured. Our task is to create a map of the branch office network. We must record all of the network device names, IP addresses and subnet masks, and physical interfaces interconnecting the network devices, as well as the name of the switch that does not have an IP address. To map the network, we will use SSH for remote access and the Cisco Discovery Protocol (CDP) to discover information about neighboring network devices. Because CDP is a Layer 2 protocol, it can be used to discover information about devices that do not have IP addresses. We will record the gathered information to complete the Addressing Table and provide a topology diagram of the Remote Branch Office network. We will be discussing Map a network using CDP and SSH remote access.Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.All my details and contact information can be found on my website, <a href="https://kevtechify.com/" rel="nofollow">https://KevTechify.com</a>-------------------------------------------------------Cisco Certified Network Associate (CCNA)Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)Network ManagementLab 10.1.5 - Use CDP to Map a NetworkPodcast Number: 81Season: 1-------------------------------------------------------Equipment I like.Home Lab ►► <a href="https://kit.co/KevTechify/home-lab" rel="nofollow">https://kit.co/KevTechify/home-lab</a>Networking Tools ►► <a href="https://kit.co/KevTechify/networking-tools" rel="nofollow">https://kit.co/KevTechify/networking-tools</a>Studio Equipment ►► <a href="https://kit.co/KevTechify/studio-equipment" rel="nofollow">https://kit.co/KevTechify/studio-equipment</a>

Use CDP to Map a Network - Network Management - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 81

https://s3.us-east-2.amazonaws.com/pod-public-media-files/2022/11/25/21/923ed297-fc44-4ebb-abf7-145f8204c78e_ccna3_v7_ensa_-_ep_07.6.1_-_youtube.mp3

In this episode we are going to look at WAN Concepts.We will be investigating various types of WANs by exploring a topology that uses diverse connectivity technologies.Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.All my details and contact information can be found on my website, <a href="https://kevtechify.com/" rel="nofollow">https://KevTechify.com</a>-------------------------------------------------------Cisco Certified Network Associate (CCNA)Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)WAN ConceptsLab 7.6.1 - WAN ConceptsPodcast Number: 80Season: 1-------------------------------------------------------Equipment I like.Home Lab ►► <a href="https://kit.co/KevTechify/home-lab" rel="nofollow">https://kit.co/KevTechify/home-lab</a>Networking Tools ►► <a href="https://kit.co/KevTechify/networking-tools" rel="nofollow">https://kit.co/KevTechify/networking-tools</a>Studio Equipment ►► <a href="https://kit.co/KevTechify/studio-equipment" rel="nofollow">https://kit.co/KevTechify/studio-equipment</a>

WAN Concepts - WAN Concepts - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 80

https://s3.us-east-2.amazonaws.com/pod-public-media-files/2022/11/25/21/067d8a2f-babe-4d5e-a923-2cc5ac265a23_ccna3_v7_ensa_-_ep_06.8.1_-_youtube.mp3

In this episode we are going to look at Configure NAT for IPv4.We will be Configuring Dynamic NAT with PAT and Configuring Static NAT.Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.All my details and contact information can be found on my website, <a href="https://kevtechify.com/" rel="nofollow">https://KevTechify.com</a>-------------------------------------------------------Cisco Certified Network Associate (CCNA)Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)NAT for IPv4Lab 6.8.1 - Configure NAT for IPv4Podcast Number: 79Season: 1-------------------------------------------------------Equipment I like.Home Lab ►► <a href="https://kit.co/KevTechify/home-lab" rel="nofollow">https://kit.co/KevTechify/home-lab</a>Networking Tools ►► <a href="https://kit.co/KevTechify/networking-tools" rel="nofollow">https://kit.co/KevTechify/networking-tools</a>Studio Equipment ►► <a href="https://kit.co/KevTechify/studio-equipment" rel="nofollow">https://kit.co/KevTechify/studio-equipment</a>

Configure NAT for IPv4 - NAT for IPv4 - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 79

https://s3.us-east-2.amazonaws.com/pod-public-media-files/2022/11/25/21/a097d5ea-a801-42b4-8b2e-bdb6b5462e7d_ccna3_v7_ensa_-_ep_06.6.7_-_youtube.mp3

In this episode we are going to look at Configure PAT.We will be Configuring Dynamic NAT with Overload, Verifying Dynamic NAT with Overload Implementation, Configuring PAT using an Interface, and finally Verifying PAT Interface Implementation.Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.All my details and contact information can be found on my website, <a href="https://kevtechify.com/" rel="nofollow">https://KevTechify.com</a>-------------------------------------------------------Cisco Certified Network Associate (CCNA)Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)NAT for IPv4Lab 6.6.7 - Configure PATPodcast Number: 78Season: 1-------------------------------------------------------Equipment I like.Home Lab ►► <a href="https://kit.co/KevTechify/home-lab" rel="nofollow">https://kit.co/KevTechify/home-lab</a>Networking Tools ►► <a href="https://kit.co/KevTechify/networking-tools" rel="nofollow">https://kit.co/KevTechify/networking-tools</a>Studio Equipment ►► <a href="https://kit.co/KevTechify/studio-equipment" rel="nofollow">https://kit.co/KevTechify/studio-equipment</a>

Configure PAT - NAT for IPv4 - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 78

https://s3.us-east-2.amazonaws.com/pod-public-media-files/2022/11/25/21/d2757e84-96e8-4f6f-9a0d-ba07eafd510f_ccna3_v7_ensa_-_ep_06.5.6_-_youtube.mp3

In this episode we are going to look at Configure Dynamic NAT.We will be Configuring Dynamic NAT and Verifying NAT Implementation.Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.All my details and contact information can be found on my website, <a href="https://kevtechify.com/" rel="nofollow">https://KevTechify.com</a>-------------------------------------------------------Cisco Certified Network Associate (CCNA)Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)NAT for IPv4Lab 6.5.6 - Configure Dynamic NATPodcast Number: 77Season: 1-------------------------------------------------------Equipment I like.Home Lab ►► <a href="https://kit.co/KevTechify/home-lab" rel="nofollow">https://kit.co/KevTechify/home-lab</a>Networking Tools ►► <a href="https://kit.co/KevTechify/networking-tools" rel="nofollow">https://kit.co/KevTechify/networking-tools</a>Studio Equipment ►► <a href="https://kit.co/KevTechify/studio-equipment" rel="nofollow">https://kit.co/KevTechify/studio-equipment</a>

Configure Dynamic NAT - NAT for IPv4 - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 77

https://s3.us-east-2.amazonaws.com/pod-public-media-files/2022/11/25/21/63c31e8d-31bb-4e20-a681-21c01b8205b6_ccna3_v7_ensa_-_ep_06.4.5_-_youtube.mp3

In this episode we are going to look at Configure Static NAT.In IPv4 configured networks, clients and servers use private addressing. Before packets with private addressing can cross the internet, they need to be translated to public addressing. Servers that are accessed from outside the organization are usually assigned both a public and a private static IP address. In this activity, we will configure static NAT so that outside devices can access an inside server at its public address. We will be Testing Access without NAT, Configuring Static NAT, and Testing Access with NAT.Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.All my details and contact information can be found on my website, <a href="https://kevtechify.com/" rel="nofollow">https://KevTechify.com</a>-------------------------------------------------------Cisco Certified Network Associate (CCNA)Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)NAT for IPv4Lab 6.4.5 - Configure Static NATPodcast Number: 76Season: 1-------------------------------------------------------Equipment I like.Home Lab ►► <a href="https://kit.co/KevTechify/home-lab" rel="nofollow">https://kit.co/KevTechify/home-lab</a>Networking Tools ►► <a href="https://kit.co/KevTechify/networking-tools" rel="nofollow">https://kit.co/KevTechify/networking-tools</a>Studio Equipment ►► <a href="https://kit.co/KevTechify/studio-equipment" rel="nofollow">https://kit.co/KevTechify/studio-equipment</a>

Configure Static NAT - NAT for IPv4 - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 76

https://s3.us-east-2.amazonaws.com/pod-public-media-files/2022/11/25/21/437ddde3-5745-4b9f-9f74-b3faa8956679_ccna3_v7_ensa_-_ep_06.2.7_-_youtube.mp3

In this episode we are going to look at Investigate NAT Operations.As a frame travels across a network, the MAC addresses may change. IP addresses can also change when a packet is forwarded by a device configured with NAT. In this activity, we will investigate what happens to IP addresses during the NAT process. We will be Investigating NAT Operation Across the Intranet, Investigating NAT Operation Across the Internet, and Conduct Further Investigations.Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.All my details and contact information can be found on my website, <a href="https://kevtechify.com/" rel="nofollow">https://KevTechify.com</a>-------------------------------------------------------Cisco Certified Network Associate (CCNA)Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)NAT for IPv4Lab 6.2.7 - Investigate NAT OperationsPodcast Number: 75Season: 1-------------------------------------------------------Equipment I like.Home Lab ►► <a href="https://kit.co/KevTechify/home-lab" rel="nofollow">https://kit.co/KevTechify/home-lab</a>Networking Tools ►► <a href="https://kit.co/KevTechify/networking-tools" rel="nofollow">https://kit.co/KevTechify/networking-tools</a>Studio Equipment ►► <a href="https://kit.co/KevTechify/studio-equipment" rel="nofollow">https://kit.co/KevTechify/studio-equipment</a>

Investigate NAT Operations - NAT for IPv4 - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 75

https://s3.us-east-2.amazonaws.com/pod-public-media-files/2022/11/25/21/f796e8c3-a178-4ab4-bf43-167c602f59eb_ccna3_v7_ensa_-_ep_05.5.1_-_youtube.mp3

In this episode we are going to look at IPv4 ACL Implementation Challenge.In this activity we will configure extended, standard named, and extended named ACLs to meet specified communication requirements. We will be discussing Configuring a router with standard named ACLs, Configuring a router with extended named ACLs, Configuring a router with extended ACLs to meet specific communication requirements, Configuring an ACL to control access to network device terminal lines, Configuring the appropriate router interfaces with ACLs in the appropriate direction, and finally Verifying the operation of the configured ACLs., , , .Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.All my details and contact information can be found on my website, <a href="https://kevtechify.com/" rel="nofollow">https://KevTechify.com</a>-------------------------------------------------------Cisco Certified Network Associate (CCNA)Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)ACLs for IPv4 ConfigurationLab 5.5.1 - IPv4 ACL Implementation ChallengePodcast Number: 74Season: 1-------------------------------------------------------Equipment I like.Home Lab ►► <a href="https://kit.co/KevTechify/home-lab" rel="nofollow">https://kit.co/KevTechify/home-lab</a>Networking Tools ►► <a href="https://kit.co/KevTechify/networking-tools" rel="nofollow">https://kit.co/KevTechify/networking-tools</a>Studio Equipment ►► <a href="https://kit.co/KevTechify/studio-equipment" rel="nofollow">https://kit.co/KevTechify/studio-equipment</a>

IPv4 ACL Implementation Challenge - ACLs for IPv4 Configuration - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 74

https://s3.us-east-2.amazonaws.com/pod-public-media-files/2022/11/25/21/4787a767-a7ca-4d83-9394-691b899b06ad_ccna3_v7_ensa_-_ep_05.4.13_-_youtube.mp3

In this episode we are going to look at Configure Extended IPv4 ACLs - Scenario 2.In this scenario, specific devices on the LAN are allowed to various services on servers located on the internet. We will be discussing Configuring a Named Extended ACL and finally Appling and Verifying the Extended ACL.Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.All my details and contact information can be found on my website, <a href="https://kevtechify.com/" rel="nofollow">https://KevTechify.com</a>-------------------------------------------------------Cisco Certified Network Associate (CCNA)Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)ACLs for IPv4 ConfigurationLab 5.4.13 - Configure Extended IPv4 ACLs - Scenario 2Podcast Number: 73Season: 1-------------------------------------------------------Equipment I like.Home Lab ►► <a href="https://kit.co/KevTechify/home-lab" rel="nofollow">https://kit.co/KevTechify/home-lab</a>Networking Tools ►► <a href="https://kit.co/KevTechify/networking-tools" rel="nofollow">https://kit.co/KevTechify/networking-tools</a>Studio Equipment ►► <a href="https://kit.co/KevTechify/studio-equipment" rel="nofollow">https://kit.co/KevTechify/studio-equipment</a>

Configure Extended IPv4 ACLs - Scenario 2 - ACLs for IPv4 Configuration - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 73

https://s3.us-east-2.amazonaws.com/pod-public-media-files/2022/11/25/21/f689396e-e393-4a84-9920-c147cee5a647_ccna3_v7_ensa_-_ep_05.4.12_-_youtube.mp3

In this episode we are going to look at Configure Extended ACLs - Scenario 1.Two employees need access to services provided by the server. PC1 only needs FTP access while PC2 only needs web access. Both computers need to be able to ping the server, but not each other. We will be Configuring, Applying and Verifying an Extended Numbered ACL, and finally Configuring, Applying and Verifying an Extended Named ACL.Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.All my details and contact information can be found on my website, <a href="https://kevtechify.com/" rel="nofollow">https://KevTechify.com</a>-------------------------------------------------------Cisco Certified Network Associate (CCNA)Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)ACLs for IPv4 ConfigurationLab 5.4.12 - Configure Extended ACLs - Scenario 1Podcast Number: 72Season: 1-------------------------------------------------------Equipment I like.Home Lab ►► <a href="https://kit.co/KevTechify/home-lab" rel="nofollow">https://kit.co/KevTechify/home-lab</a>Networking Tools ►► <a href="https://kit.co/KevTechify/networking-tools" rel="nofollow">https://kit.co/KevTechify/networking-tools</a>Studio Equipment ►► <a href="https://kit.co/KevTechify/studio-equipment" rel="nofollow">https://kit.co/KevTechify/studio-equipment</a>

Configure Extended ACLs - Scenario 1 - ACLs for IPv4 Configuration - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 72

https://s3.us-east-2.amazonaws.com/pod-public-media-files/2022/11/25/21/f55c19a4-7366-449e-9c4a-a6c0e0d26e5e_ccna3_v7_ensa_-_ep_05.2.7_-_youtube.mp3

In this episode we are going to look at Configure and Modify Standard IPv4 ACLs.Network security and traffic flow control are important issues when designing and managing IP networks. The ability to configure proper rules to filter packets, based on established security policies, is a valuable skill. In this lab, we will set up filtering rules for two business locations that are represented by R1 and R3. Management has established some access policies between the LANs located at R1 and R3, which we must implement. The Edge router sitting between R1 and R3 has been provided by the ISP will not have any ACLs placed on it. We would not be allowed any administrative access to the Edge router because we can only control and manage your own equipment. We will be discussing Verifying Connectivity, Configuring and Verifying Standard Numbered and Named ACLs and finally Modify a Standard ACL.Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.All my details and contact information can be found on my website, <a href="https://kevtechify.com/" rel="nofollow">https://KevTechify.com</a>-------------------------------------------------------Cisco Certified Network Associate (CCNA)Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)ACLs for IPv4 ConfigurationLab 5.2.7 - Configure and Modify Standard IPv4 ACLsPodcast Number: 71Season: 1-------------------------------------------------------Equipment I like.Home Lab ►► <a href="https://kit.co/KevTechify/home-lab" rel="nofollow">https://kit.co/KevTechify/home-lab</a>Networking Tools ►► <a href="https://kit.co/KevTechify/networking-tools" rel="nofollow">https://kit.co/KevTechify/networking-tools</a>Studio Equipment ►► <a href="https://kit.co/KevTechify/studio-equipment" rel="nofollow">https://kit.co/KevTechify/studio-equipment</a>

Configure and Modify Standard IPv4 ACLs - ACLs for IPv4 Configuration - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 71

Configuration Examples with KevTechify for the Cisco Certified Network Associate (CCNA)